b'Osbournes WPL 80 (Channel). Sikaflex-20AT or similar approved sealantbead.50 x 50 x 3 anodised aluminium jamb angle.40 x 40 x 3 fixing angle pop rivited to back offrame @ 300mm c/c. Fix into blockwork with 30 x 3 anodised aluminium flat to face ofsuredrive anchors @ 300mm c/c. louvre, 5mm clear of plaster sill.5mm minPlastic shims to suit.Approved waterproof membrane to entireopening and face of blockwork.Concrete blockwork to Engineers design anddocumentation. Selected plaster finish to exterior of blockworkwith paint finish as selected by Architect.Model WPL 80 (Channel Frame)Typical Blockwall/Louvre Sill Detail 03 Osbournes LtdScale 1:5General Notes:Flashing materials must be selected based on environmental exposure, refer to NZS 3604:1999.Refer to the manufacturer or supplier for technical information of all materials.This is an untested alternative solution to NZBC E2/AS1.This information is intended to be informative and used as a guideline only. Due to the many variables affecting different projectsOsbournes Ltd can not replace the judgment or advice of an Architect, Engineer or any other relevanttechnical expert and such experts must be consulted to determine the suitability or otherwise of the details or the necessity forfurther design/detailing.Page 14'